• AeroQuad Frames
  • AeroQuad Shields
  • AeroQuad Sensors
  • AeroQuad Propellers

    Featured Products:



    AeroQuad Typhoon ARF Kit AeroQuad v2.1 Kit
    Our Price: $449.95
    Price $199.95
    AeroQuad Typhoon ARF Kit AeroQuad Shield v2.1 Kit
    This is a tough yet light frame that can take a beating AND it looks good at the same time. All the wires and speed controllers are hidden in the arms and is great for any application ranging carrying camera payloads, sport flying and FPV.

    Includes:
    • The new AeroQuad 32 board - comes pre-assembled and software pre-loaded and calibrated.
    • Typhoon Frame Kit with AeroQuad logo top plate
    • 4x A2212-13 Brushless Motors
    • 4x 18 Amp Electronic Speed Controllers (ESC's)
    • 3x 10x4.5 Propellers
    • 3x 10x4.5 Pusher Propellers
    • R/C Receiver Harness

    This is a complete kit to build an AeroQuad flight control board. It allows you to easily connect the Sparkfun 9DOF sensor (which includes the ITG 3200 triple axis gyro, the ADXL 345 triple axis accelerometer and the HMC 5883L triple axis magnetometer) to an Arduino Mega to create a 6 degree of freedom inertial measurement unit (IMU). Additionally the BMP 085 barometer is supported for altitude hold. These are proven sensors for rock solid quadcopter flight!

    AeroQuad Mini v1.0 Kit AeroQuad Cyclone ARF Kit
    Our Price: $99.95
    Sale Price: $84.95
    Our Price: $534.95
    AeroQuad Mini v1.0 Kit AeroQuad Cyclone ARF Kit
    This kit includes the AeroQuad Mini Shield which uses the Arduino Pro Mini and the SparkFun 6DOF Sensor Board (which uses the solid ITG3200 gyro and the ADXL345 accelerometer).  It has a built in battery monitor, exposes the pinouts for a camera stabilization system (D12/D13) and exposes pinouts for analog devices such as IR or ultrasonic distance sensors (AI1-3).  This shield also has a stackable design which will allow for future expansion (multiple processors, magnetometer/barometer, GPS or OSD).  The shield is 63.5mm x 56mm and has a 45mm x 45mm hole spacing. future add-ons. This kit provides most everything you need to build a Cyclone based AeroQuad! The only thing left to choose is your battery, battery connector and desired R/C transmitter/receiver!

    The Cyclone frame gives you the flexibility to build the quadcopter, hexacopter and octocopter configurations (including tri and Y6)!

    Here's what you get in this full kit:
    • AeroQuad 32 v2 flight control board with case
    • Cyclone Frame Kit
    • 4x A2217-9 Brushless Motors
    • 4x 20 Amp Electronic Speed Controllers (ESC's)
    • 3x 12x3.8 Propellers
    • 3x 12x3.8 Pusher Propellers
    • New lightweight AQ PowerBox v1.0
    • ESC extension cables to connect motors to ESC's (wires are hidden in arms)
    AeroQuad 32 Flight Control Board (Version 2) Arduino Uno
    Price $149.95
    Price $29.95
    AeroQuad 32 Flight Control Board Version 2 Arduino Uno
    The AeroQuad 32 is powered by a 168MHz 32 bit ARM processor, to give you fast and solid flight performance! This flight board has been upgraded to use the new HMC5983-TR for locked in heading hold and uses the trusted MPU6000 in SPI mode for ultra fast senor sampling for rock solid stability. It has been redesigned for ease of connection with your multicopter frame, yet exposes all the pins of the initial version for your own customization as desired! This is a pre-soldered board, there is no need for further assembly and it will come pre-loaded with flight software for a Quad X configuration.

    Arduino is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing/Wiring language. The Uno is a microcontroller board based on the ATmega328.