You are here: Home > Cables
Sort By:
Page of 2
AeroQuad PowerBox v1.0
Our Price: $14.95

This is our brand new power distribution board. Lightweight, compact and great look.



Size - 1.5" x 1.5"
Weight - 46gram
4 to 1 Power Harness, Male Deans to 3.5mm Bullet Connectors
4 to 1 Power Harness, Male Deans to 3.5mm Bullet Connectors
Our Price: $12.99

The Next Level 4 to 1 Power Harness simplifies installation of the speed controllers in your Quad-Rotor model. This harness is constructed from 10 AWG wire on the power input side and 16AWG wire on the output side to be able to handle the current demands of larger high-power quads. The input side features a male Deans connector to plug into your battery, and 4 sets of 3.5mm bullet connectors on the output side to provide power to your speed controllers. To use this Power Harness, you will need to install a male 3.5mm bullet connector on the red positive lead, and a female 3.5mm bullet connector on the black negative lead of each of your speed controllers.
USB MiniB Cable - 6 Foot
USB MiniB Cable - 6 Foot
Our Price: $3.95

USB 2.0 type A to miniB 5-pin. This allows you to connect the XBee Explorer USB board to your computer.
USB Cable A to B - 6 Foot
USB Cable A to B - 6 Foot
Price $3.95

Standard issue USB 2.0 cables. This is the most common A to B Male/Male type peripheral cable. Use this to connect your Arduino to your computer.
7 Pin JST SH pigtail
JST SH 7 Pin Pigtail
Our Price: $2.95

7 Pin JST SH pin with 1mm pin spacing. This fits the OSD connector on the AQ32 board. The cable comes as a pigtail meaning that the connector is already attached for you with 4 inches of insulated wire so that you can attach it to your peripheral of choice.
6 Pin JST SH pigtail
JST SH 6 Pin Pigtail
Our Price: $2.95

6 Pin JST SH pin with 1mm pin spacing. This fits the GPS connector on the AQ32 board. The cable comes as a pigtail meaning that the connector is already attached for you with 4 inches of insulated wire so that you can attach it to your peripheral of choice.
4 Pin JST SH pigtail
JST SH 4 Pin Pigtail
Our Price: $2.95

4 Pin JST SH pin with 1mm pin spacing.  This fits the Serial and I2C connectors on the AQ32 board.  The cable comes as a pigtail meaning that the connector is already attached for you with 8 inches of insulated wire so that you can attach it to your peripheral of choice.
Black ESC Extension Cable 15 inch (380mm)
Black ESC Extension Cable 15 inch (380mm)
Our Price: $2.50

This cable has a 3.5mm male connector on one end and a 3.5mm female connector on the other.  It is used to extend the distance from your ESC to your brushless motor.  The 15 inch length of this extension cable works perfectly with the 12 inch aluminum square tube arms.  The extension cable uses 16 gauge silicon wire.
Red ESC Extension Cable 15 inch (380mm)
Red ESC Extension Cable 15 inch (380mm)
Our Price: $2.50

This cable has a 3.5mm male connector on one end and a 3.5mm female connector on the other.  It is used to extend the distance from your ESC to your brushless motor.  The 15 inch length of this extension cable works perfectly with the 12 inch aluminum square tube arms.  The extension cable uses 16 gauge silicon wire.
White ESC Extension Cable 15 inch (380mm)
White ESC Extension Cable 15 inch (380mm)
Our Price: $2.50

This cable has a 3.5mm male connector on one end and a 3.5mm female connector on the other.  It is used to extend the distance from your ESC to your brushless motor.  The 15 inch length of this extension cable works perfectly with the 12 inch aluminum square tube arms.  The extension cable uses 16 gauge silicon wire.