Home > Transmitter/Receiver >

OpenLRSng DTF UHF 6 Channel Long Range Receiver
433MHz UHF LRS long range RF transmitter receiver openLRSng openLRS

Our Price: $44.99

Stock Status:(Out of Stock)
Availability: Usually Ships in 3 to 5 Business Days
Item: LRSNG-008

Please consider purchasing your openLRSng units from us! For each unit sold a royalty gets paid to the software author, Kha!

This receiver comes with a built in low pass filter to reduce interference from transmission sources such as video transmitters. This is a must for building your long range FPV ship! For your convenience, this unit comes preloaded with the OpenLRSng software and is compatible with all transmitters that use OpenLRSng.

The DTF UHF OpenLRSng system Rx Module is an open source receiver module that can frequency hop between 400-460mhz and has the capability to send/receive serial telemetry back to your transmitter and flight control board. Since the software is open source, you have direct access to the source code and can customize it to your exact needs!

Latest documentation on setting up this receiver can be found at:
Pinout information can be found here: https://github.com/openLRSng/openLRSng/wiki/Hardwa...
Latest version of the software can be downloaded at: https://github.com/openLRSng/openLRSng
    • Lowpass input filter to reduce out-of-band interference
    • PPM output up to 16 channels (enable in menu)
    • RSSI output, digital (enable in menu) (can be turned into 3.3v analogue with a solder jumper)
    • Completely user-settable frequency selections: 413MHz up to 453MHz
    • Up to 24 hopping channels, user-settable
    • Custom pin mapping
    • Adjust settings and bind wirelessly, without digging it out of your aircraft
    • Can also be used as a transmitter
    • -121dBm rated sensitivity
    • 54x19mm size with pins and SMA
    • around 6 grams with servo pins and SMA connector